What are the common problems and precautions of Co

2022-07-22
  • Detail

With the improvement of people's living standards, the traditional range hood can no longer meet the needs of families now, and the open kitchen has become the mainstream. In order to better absorb the lampblack, the integrated cooker has gradually become an irreplaceable product of the open kitchen. The integrated cooker is a kitchen appliance that integrates the functions of range hood, gas cooker, disinfection cabinet, storage cabinet and so on. Then, do you know what are the common troubleshooting methods for integrated stoves? What should we pay attention to when using the integrated stove

common fault maintenance of integrated cooker

the display screen of integrated cooker is not on:

1. The power cord falls off or the leakage protection plug is damaged. Refer to the wire connection diagram and repair or replace it after inspection and judgment

2. If the power board or computer board is damaged, repair or replace it after inspection and judgment

the fan of the integrated cooker doesn't work:

1. The power cord falls off or the plug is damaged. Refer to the wire connection diagram and repair or replace it after inspection and judgment

2. If the power board or computer board is damaged, repair or replace it after inspection and judgment

3. If the temperature rise of the motor exceeds 125 ℃, it can return to normal after cooling, or the motor may be burned out and need to be replaced

4. The control line connector is in poor contact. Refer to the circuit connection diagram to check the plug to ensure good contact

5. The capacitor is damaged and needs to be replaced

it is difficult to ignite the integrated stove:

1. The ignition knob is not turned 90 degrees, the air outlet is too small, and there is not much gas passing through, so it cannot burn normally. Operate correctly and rotate the ignition knob in place

2. Ignition spark is weak, replace the battery

3. If the gas path is blocked, check whether the gas path between the gas main pipe and the gas branch pipe is smooth, and check whether the nozzle is blocked

4. If the ignition groove of the fire cover is not aligned with the fire needle, rotate the aluminum cover to align it

5. The ignition tank of the fire cover is blocked, and the plug of the ignition tank shall be cleaned

6. There is more air mixed in the trachea, so extend the ignition time until the air in the tube is completely discharged

7. The ignition electrode is oxidized and can be cleaned with a dry cloth

8. Bend or flatten the metal hose. After correcting the metal hose, check whether there is air leakage

the integrated stove often shuts down automatically after ignition:

1. There is no flame at the thermocouple (ion detection needle), so it should be corrected

2. If the fire at the thermocouple is abnormal, debug the inner fire circle damper

3. If the pulse igniter or solenoid valve is damaged, check and replace it

the flame of the integrated stove is poor:

1. The gas path is blocked. Check whether the gas path between the gas main pipe and the gas branch pipe is smooth. Check whether the nozzle is blocked

2. If the gas quality is poor or the gas at the bottom of the bottle, replace the gas

3. The burner is affected by moisture, and it will be normal after natural drying

4. The fire hole is blocked, and the blockage of the fire hole shall be cleared

5. If the fire cover and aluminum cover are not put in place, put the fire cover into the locating pin

6. The damper is not adjusted well. Adjust the damper to optimize the flame

abnormal integrated stove fire sound:

1. The gas quality is poor or the gas at the bottom of the bottle needs to be replaced

2. The fire hole is blocked, and the blockage of the fire hole shall be cleared

3. If the fire cover and aluminum cover are not in place, put the fire cover into the locating pin

4. The damper is not adjusted well. Adjust the damper to optimize the flame

the integrated stove disinfection cabinet does not work:

1. The power board or computer board is damaged. After inspection and judgment, repair or replace it

2. If the cabinet door is not closed tightly or deformed, close the cabinet door tightly or reshape the magnetic sealing strip of the cabinet door

3. The door control switch is damaged, replace it

the electromagnetic cooker of the integrated cooker does not work normally:

1. The cooker does not meet the requirements directly. Use the cooker correctly according to the instructions

2. If the bottom of the pot is uneven, replace the pot with a flat bottom

3. Place the cooker away from the center and place it in the center of the ceramic plate

there is an abnormal sound during the operation of the fan of the integrated cooker: the impeller is loose and not bolted tightly. Tighten the locknut

integrated stove EO alarm:

1. The power board or computer board is damaged. After inspection and judgment, repair or replace it

2. If the metal hose is not well connected or cracked, connect it or replace the hose

3. If the valve body leaks, send it to the maintenance department for repair or replacement

4. If there is peculiar smell (such as paint smell) in the kitchen, clear the peculiar smell or strengthen the kitchen ventilation

what are the precautions for the use of integrated stoves

1. When using integrated stoves for a long time in a closed kitchen, you should open the windows to let the air circulate, so as to prevent insufficient oxygen in the air, incomplete combustion and carbon monoxide poisoning

2. In case of gas leakage, you must stop using it immediately, turn off the main switch of the gas source immediately, and open the doors and windows to let the air circulate. Then check the cause of air leakage in time, and wait until the fault is repaired before using. When air leakage occurs, do not ignite or switch on and off electrical appliances, so as to avoid explosion

3. After cooking, confirm whether the knob is turned to the off state, and then turn off the main switch of air source

4. If the soup overflows the pot when cooking, take out the stove head in time and clean it with a brush to avoid blocking the fire hole and ensure the normal combustion of the stove

5. Do not scratch the panel surface with hard and sharp objects to avoid scratching the stove surface, and do not knock the panel vigorously. Avoid covering the flame with barrier plates, and do not place inflammables around the stove. Children should not use integrated stoves to avoid accidents

6. During the use of the disinfection cabinet, if it is found that the light emitted by the ozone ultraviolet lamp can be seen directly without passing through any transparent objects, it should be stopped immediately, and professionals should be notified to repair. If the ozone and ultraviolet lamp are damaged, it must be replaced with high ozone ultraviolet lamp with the same power and wavelength

昆明男科医院

石家庄男科医院

北京皮肤病医院

兰州银屑病医院

Copyright © 2011 JIN SHI